Trilogy Partners is thrilled to be showcasing a beautifully rustic modern downtown Breckenridge home that was redesigned to embrace the Ten Mile Range views.  We invite you to join us at the 2019 Summit County Parade of Homes which showcases 11 homes in Breckenridge, Silverthorne, Keystone, Copper Mountain and Dillon. All proceeds support The Summit Foundation, a non-profit organization inspiring people and mobilizing resources to improve and enrich the lives of individuals in Summit County and our neighboring communities of Alma, Fairplay, Kremmling and Leadville.

 

 

 

 

 

 

 

Tickets are $20 and valid for all 4 days of the Parade. Be sure to print out your receipt to exchange for a wristband! Tickets may also be purchased at the Summit County locations of City Market, Coldwell Banker, Mountain Comfort Furnishings and Alpine Bank. Our home at 515 S French St will also be selling tickets during the Parade weekends.

If you are not able to join us in Summit County this weekend, you may see before, visualization and after images of our French Street remodel here.

Guests will be able to set their own pace on a self-guided tour throughout the county.

Trilogy’s French Street project is a well-sized home at 3300 square feet in a prime downtown location. A quandary for ski lovers who also prefer to be in town is limited available space, density square foot maximums and sometimes historic preservation guidelines. This often drives downtown homeowners to remodel rather than building new. Our French Street project is perfectly-sized and elegantly simple, making it a great example of what could be possible with your downtown ski town location.

Taking that first step out of your comfort zone is always the most difficult. But once you do, a whole new world opens up. Spring is the best time to do it. Look outside, draw inspiration from nature and bring it indoors.

Challenge yourself to be creative. If you are one of those who would rather chew on tin foil than experiment with a home improvement project, start simple. Pick a room or two and give it a quick punch of color with a new accessory, piece of furniture or fresh coat of paint.

That is exactly what I did after a recent week at the High Point Home Furnishings Market in North Carolina. I was inspired to bring some of the bold colors I saw back home to defy Kansas City’s “Tan Town” image.

Our clients frequently ask about color and trends they see in Elle Décor, Veranda and other shelter magazines, but so often they are are unable to make the first step. I am a big believer in change, but not in trends — especially in home interiors, where colors should be a reflection of décor and personal attitude.

I repainted the showrooms in our furniture and design boutique with the vibrant Sassy Green by Sherwin-Williams. It felt strong and lifelike, picking up so many wonderful complements from nature, bringing what we love about the outdoors in. Clean, sharp whites, coppery browns, silver and even deep reds were enlivened against this strong new backdrop. Existing and new furniture and décor pieces took on fresh dimensions.

Afraid you can’t pull off vivid color in an entire room? Try painting an accent wall: A jolt of color can add drama and style to any ordinary space. With the neutral or tan shades that are prevalent in most homes, options for an accent wall are endless.

Try something fresh. Take your mind to South Beach and experiment with a citrus color, such as Sherwin-Williams’ Mango. I used this vibrant color on an accent wall to give the room an amazing new vibe. The artwork came to life, and the lamps and accessories took on an entirely different feel. Painting an accent wall not only gives the room new verve, it also offers a canvas for creative expression.

In addition to color inspiration, Mother Nature is a wonderful — and free — resource for reinvigorating your interiors. For example, I gathered fallen tree branches, spray-painted them white, tied them to small tacks with clear fishing wire and hung them against a lilac-colored wall to create an indoor forest. Artificial flowers added to the branches gave it color, texture and a softer appearance.

The indoor forest can be easily moved to other areas indoors or out on the patio, enhanced with fresh flowers or colorful votive candles for a summer dinner party. You might adapt it to a child’s room for a wonderful splash of fun. Play with putting lights woven in the branches or use colored clothespins to attach photographs to the branches. Involve your children in the process. It is so important for kids to be fed spoonfuls of creative opportunities. Let them feel the power of being creative.

Spring is the perfect time to check out of “Tan Town” and go for the bold. Crack open the window to the outdoors and let the creativity in during the most beautiful and transformative season.

Source: Kansascity.com

Reach Patrick Madden, a partner at Madden-McFarland Furniture & Design Boutique, 1903 W. 135th St. in Leawood, at pat@maddenmcfarland.com.

This mountain modern home located at the foot of the Gore Range in Three Peaks. Dubbed “Raven’s Nest” the home is a tight design collaboration between Mark Hogan at bhh Partners and Michael Rath at Trilogy Partners with plenty of insight and opportunity provided by the owners. Lots of glass on the south and west mountain facing sides, this 4000 square foot home is a legacy home for a young family that adores the outdoors. The home features a 30 foot high barrel vault ceiling at the entry, a custom water feature and massive chandeliers designed by Trilogy Partners. This was a BIM project, modeling, interiors, and materials selections by Trilogy Partners.
From the homeowner:  “It was while standing in a gallery in Hanoi one day last year that I learned to appreciate the true power of Trilogy’s 3D modeling technology. We had been searching for paintings for our new home in Summit County, but were having difficulty selecting individual pieces, uncertain how they would mesh with the planned design. The stress was increased by the fact that I was shopping alone, 8000 miles away from my wife in Colorado, and desperately afraid of making a mistake! Seeking advice, I sent a series of iPhone photos to Michael. Within hours, both of us received screenshots displaying the artwork as it would actually look in place, along with lighting, finishes, and furniture. This made our decision process so much easier, and it was amazing how closely the depictions in the model matched the finished product!

As we contemplated building our first custom home, we heard plenty of horror stories from friends and relatives. Our experience with Trilogy, however, belied all such expectations. Michael made the design process exciting and fun as we saw our ideas gradually take shape in the model. The computerized, online process made it easy to test out even small design changes and also allowed us to meet remotely when we didn’t have time to travel to Frisco. The software was incredibly detailed and powerful, allowing Michael to design even custom elements such as lighting fixtures and a water feature. Once we began construction, we found Trilogy to be good partners. They were transparent in their accounting and treated us with honesty and fairness at all times. When our home was finished we were dazzled, but not surprised, because it was just like the model! We found the build quality to be excellent; when problems have come up, Michael and our project manager Bill Ashley have been very responsive in addressing them, even long after the project was complete. They take great pride in their work and are not satisfied until everything is perfect. I have no reservations recommending Michael Rath and his team to anyone planning to build in the Colorado mountains, or anywhere else for that matter!”

Take the virtual tour of a Trilogy home in Silverthorne, Colorado.
Desktop Computer or Laptop– Click the link and allow the page to load. To start the Guided Tour, use your mouse to click the “play” button in the bottom left corner of the screen. You can pause the Guided Tour at any time by pressing the space bar, and resume the tour by again pressing play. To move through the space, use your arrow keys. To look up or down,  click & drag with your mouse. Moving up and down stairs is usually easier by clicking your mouse on one of the clear circles. Click on the dollhouse icon in the bottom right of the screen to view the entire space at once in either dollhouse or floorplan view.
On a phone, tablet or touchscreen– Once the page loads, press the play button for the Guided Tour, tap the screen to pause and explore the space, then press play again to resume tour. To move freely through the space, tap on the screen where you want to go. Drag your finger across the screen to look up, down, left or right. Tap the dollhouse icon in the bottom right to view the entire space at once in either dollhouse or floorplan view.

Going green doesn’t have to cost more. Experts at the NAHB Research Center have identified design and construction tactics that builders have used to minimize the cost premium for green.

Everyone needs to stretch a dollar these days. This is certainly true for home builders, and it’s especially true for home buyers in the entry-level, affordable, or workforce housing sectors. Green building, once widely perceived to be a luxury approach to home building, can be a viable solution for both builders and consumers in the affordable market.

Constructing a green home does come with some added costs, but a lot of builders find that green practices can actually reduce their construction costs and enhance the quality of the homes they build. Many green practices also result in operational and maintenance savings for homeowners.

Using a combination of input from builders participating in the National Green Building Certification Program and results from recent research we did for HUD on the costs and benefits of green affordable housing, the NAHB Research Center has identified seven beneficial practices to consider when building green for the affordable market.

1. Work closely with your suppliers

If you’re new to green building in general or to building green homes with a lower price point, you may want to start your journey by talking with your product suppliers.

Richmond, Va.-based First Richmond Associates has been building quality workforce housing for nearly two decades. Recently, the builder decided that going green with its homes would provide even greater value to customers and set its product apart from the competition. Susan Hadder, president of First Richmond, admits the company didn’t know much about green building, so she let her suppliers know about the new direction they were taking and asked for their help.

“A lot of them were as new to green as we were,” says Hadder, “but they were excited to help us find the best product options available from various manufacturers. It was kind of fun for everyone to discover something new.”

Hadder says she got very quick responses from all her product reps, along with some incentives, which helped her identify what the company needed to get its new green homes certified to the National Green Building Standard (ICC 700). She was pleasantly surprised to find that many of the green product options that would garner points for the home in the certification process were actually an even swap for her in terms of price.

Specifically with flooring options, she found that recycled-content carpet and padding, engineered hardwood flooring, and recycled tile for the bathrooms were all competitively priced with the products she traditionally used — some a few pennies more per unit, some a few pennies less. First Richmond now has two of their Earth-Friendly workforce homes (sales prices range from the $170,000’s to low $200,000’s) Green Certified to ICC 700 by the NAHB Research Center, and the company has plans for more.

2. Look for two-for-one green product benefits

To maximize green benefits while keeping construction costs low, use products or practices with multiple green features. For example, when specifying cabinets or cabinet materials, look for those that have low- or no-formaldehyde content and are made of recycled material. That way, you may be able to gain green certification points for both indoor environmental quality and resource efficiency. While most green rating systems won’t allow for “double dipping” on points (i.e., claiming points in more than one area for the same green attribute in the same product or practice), most will allow for multiple green attributes in the same product to be counted across multiple point categories.

3. Don’t forget about water efficiency

In our work with HUD, we found that water efficiency improvements for both new and renovated affordable projects are commonly overlooked even though they offer a quantifiable benefit to homeowners for little to no additional construction cost. Be sure not to discount the cost benefits for affordable clients of low-flow faucets, toilets, and showerheads, as well as rated water-saving appliances.

As for finding the products at an affordable price, there is a much wider array of low-flow toilets, faucets, and showerheads on the market today than even five years ago, and the most basic models are cost neutral with comparable non-low-flow fixtures. Most major plumbing product manufacturers now offer these products, eliminating the need for costly special orders, in most cases. With bathroom sink faucets, even if your manufacturer of choice doesn’t make a low-flow version, you can buy replacement aerators that satisfy the requirements of most national green rating systems for around $2 a piece.

New construction on the Goose Pasture Tarn in Blue River, Colorado outside of Breckenridge.

 

4. Consider alternative framing techniques

Some changes in your framing materials or techniques might provide both cost/time savings and a means to an end in securing points toward green certification. For instance, consider using panels or trusses in lieu of site-built systems. These techniques are labor and resource efficient, resulting in less on-site waste and possibly lower labor and materials cost overall. Fabricated systems often create greater thermal efficiency over stick frames. Many green rating systems, including the National Green Building Standard, also award points for use of panels and trusses.

If you want to continue framing totally on site, there are several optimum value engineering (OVE) techniques that can save on material or labor costs, and can generate green points at the same time. Look into options like:

  • Ladder blocking — uses less wood; provides more room for insulation; gets green points
  • Two-stud corners — at least one less stud at each corner; allows for more fully insulated corner; gets green points
  • Switch from 2x4s at 16 inches on center to 2x6s at 24 inches on center — may result in small increase in incremental cost initially, but gets a lot of green bang for your buck.

5. Explore low-cost strategies with design

Green, at any price point, is not accomplished through product selection alone. Many of the other “ingredients” for a green home involve strategies that can cost very little or nothing at all. For example, depending on the orientation and size of your lot, flipping a house plan is a very low-cost, low-effort activity that can result in green benefits like positioning the majority of windows on the south side of a home for passive solar and natural lighting gains.

6. Pay attention to placement and sizing of hvac and plumbing systems

Optimize your duct runs and centrally locate your mechanical room for material cost savings and increased energy efficiency. Even for smaller homes, be sure not to have more ducts or longer duct runs than you need in any part of the house. Using a central return also reduces material costs and is a simple system that can provide adequate circulation and cost savings to both you and your buyers.

Placing all your HVAC equipment, including ducts, in conditioned space within the home is also beneficial. In addition to creating significant energy savings for homeowners, this practice may also allow you to spec smaller, less-expensive HVAC equipment and limit or eliminate the need for additional insulation for the duct system. Many homes today, even those that may be otherwise energy and resource efficient, have oversized HVAC equipment. As the building envelope of your homes becomes tighter and more energy efficient, the HVAC burden is significantly reduced. A smaller system obviously costs less and could offset other green upgrades you’re making in your homes.

For your plumbing system, make sure you have chosen the most efficient design for your purposes. For multi-story homes, consider a stacked system, which will probably require shorter plumbing runs, less piping, and possibly less labor time from your plumbing contractor. Also consider centrally locating your water heater, as a central location makes the average of every run shorter, thereby reducing material costs.

7. Rely on green design professionals

Green homes often require a higher degree of precision in their design and construction to ensure that the finished product works the way it was designed to work, as a whole house relying on interdependent systems for its optimum efficiency and homeowner comfort. Having experts well versed in green products, practices, and protocols can save you thousands of dollars in trial-and-error and callbacks in the long run.

That being said, there are different ways to go about creating your design team. One way is to seek out experts in areas such as mechanical systems, plumbing design, and landscape architecture, with specific expertise in green building practices. Another tactic is to rally those with whom you already work to the pursuit of greener, more efficient homes. Similar to the enthusiasm and excitement Susan Hadder generated with her suppliers when First Richmond began seeking green solutions, you may generate the same kind of interest with your existing construction partners to learn all they can and contribute. Either way, it’s important to get everyone in your construction chain on the same page with what you’re trying to accomplish. Contractors and suppliers that are not informed can create inadvertent barriers to your ultimate success.

More information and technical detail about these techniques can be found on the Research Center’s technical website,www.ToolBase.org.

Created in 1964, the NAHB Research Center (www.nahbrc.com) is a full-service product commercialization company that strives to make housing more durable, affordable, and efficient. The Research Center provides public and private clients with an unrivaled depth of understanding of the housing industry and access to its business leaders.

Source : Professional Builder

Extreme remodel on the Goose Pasture Tarn in Blue River, Colorado

by Leo Wolfson| brought to you by Breckenridge Building Center

Fall is a time of transition and preparation in the High Country. As the leaves change color so turn the thoughts of Summit County residents to the winter (for better or worse) and six months of snowfall to come. This arctic onslaught is tough on almost any home and a few precautions need to be taken to ensure that yours is ready for winter’s grip.

Pipes: Preventing your pipes from freezing is an extremely important, cost-saving measure that must be taken before winter hits. Surrounding them with insulation or heat tape does the trick, as will heating the crawl space where the pipes are located. Jason Kompf of Antique Design Carpentry & Remodeling sees his fair share of poor winter prep in the High Country. “Wouldn’t be uncommon to have 20-something houses and (they are) flooded from         frozen pipes every winter,” he chuckled. Kompf recommends taking care of pipes no later than Thanksgiving.

Heating Systems & Furnaces: The last thing you’d ever want is to discover is that your furnace has given out when that first cold snap rolls around. Test your furnace now to make sure that it’s running effectively, which also helps with the frozen pipe issue. Often second-home owners will find out that their heating system has given out upon arrival, making for an inauspicious start to their vacation.

Close-up surfaces: Make sure all exposed wood is sealed up or caulked, which includes keeping paint up to date. “People neglect to paint up here. Every house should be painted on a three- to five-year cycle due to the UV rays and the sun and the weather,” explained Kompf. The extreme High Country elements do a number on the exterior of a house and the longer you wait to get it repainted the greater chance there’ll be wood damage. “I see that a lot — people calling me, they want (me to) repair siding or fix something. They haven’t painted in 15 years and it’s sunned,” said Kompf with a chuckle.

Keeping windows properly sealed is also important. This eliminates drafts and helps save on energy bills.

Gutters and other drainage fixtures: Make sure all leaves and other debris are cleaned out of your gutters. If you wait till spring it will likely be a muddy, moldy mess and could be harmful due to the weight that’s built up.

Decks: Kompf advises using a clear deck sealer on wood decks in the fall. The sealer protects from water damage and will help keep the color longer. Clean a deck frequently before applying the sealer and voilá! You’ll have a protected wood deck that even Old Man Winter can’t touch. If thinking of building a deck for your home this fall, consider a composite material, as it’s cheaper and less sensitive to nature’s elements.

The roof: As winter begins to ramp up, keep an eye out for the amount of snow that collects on your roof. Colorado powder may be light and dry but that hardly matters when 2 feet or more collects, often causing ice dams and structural damage. Kompf recommends shoveling a roof at least once a winter, but if Old Man Winter strikes with an early fury, a trip up to the top deck might be necessary in December.

“No matter how well your roof was done, water can get in there,” said Kompf. Before winter arrives look for loose or broken shingles. These small trouble spots can become large problems during the winter. On the interior, look for stains or damp spots in the crawlspace or top ceiling of your house which can lead to mold and roof damage if not taken care of.

Beware of the south: The south side of a structure may receive the most sun during the winter but this doesn’t mean it’s less exposed to the elements. The location actually creates a vicious melt/freeze cycle that chips away at paint and deteriorates the wood. Extra attention should be paid to this side regarding all previous preparations listed.

 

Article from Summit Daily courtesy of Breckenridge Building Center | 13445 Hwy. 9, Breckenridge (970) 453-2372 |http://www.breckenridgebuildingcenter.com

Trilogy Partners is proud to be producing a forum as part of the Breckenridge Film Festival on Saturday, September 23!

“Merging of Entertainment and Design” brings together top industry leaders from tech, design and film to discuss how technology advances from 3D Modeling to Virtual technologies are reshaping their careers and our lives. Screen the Colorado-based short film “Who I Am” about immigrant and first generation students in Ft. Morgan, CO. Try out the brand new, not even on the market yet (!!) HP Z VR Backpacks and tour a home through Augmented Reality.

If you are interested in technology, home design and construction, filmmaking, 3D modeling and visualization or the impact that we can have on our community development planning, then this is the place to be on Saturday, September 23.

Location: South Branch Library in the Hopeful and Discovery Rooms at 103 S Harris Street in Breckenridge, CO

Date: Saturday, September 23 from 4-6pm

Email virtual@trilogybuilds.com to reserve your VIP spot as seating is limited. RSVP and share the event on Facebook.

Panelists: 

Amy Hoeven is from a small rural town on the eastern plains and is a fourth generation native of Colorado. After she graduated from CSU in 1995 with a degree in Liberal Arts, she used her Communications and Technical Journalism training to pursue a career in communications and community outreach in both the for-profit and non-profit sectors. In 2010, Amy was named Young Professional of the Year by the Fort Collins area Chamber of Commerce. Amy understands the importance of storytelling and believes everyone’s story adds value to their communities. In 2017, she was the Executive Producer of Who I Am, a Virtual Reality documentary film showcasing the work of first-generation CSU students mentoring immigrant and refugee high school students in Fort Morgan. Her ability to observe the environment around her, interact with people and recognize human connections allows her to be a compassionate and active member of society.

Jim Zafarana was with HP as Vice President and General Manager, Global Head of Workstations, Thin Clients, and Commercial Immersive, part of HP’s Personal Systems. In this role, he was responsible for business, innovation, and product strategy and execution, including Product Development, Product Management, and go-to-market strategy across the Workstations & Thin Clients worldwide. Prior to this role, Zafarana was Vice President and General Manager for the Workstation Global Business Unit, responsible for HP’s Workstation business in all market segments worldwide. Jim also has served as Vice President, Worldwide Marketing for HP’s Workstation business.

Kaden Strand is the CEO and founder of Blue Penguin VR, a custom solutions company blending software engineering, creative design, and practical problem solving to impact enterprise adoption and novel research for modern virtual and augmented reality technologies. Previously, Kaden led the cross-disciplinary Virtual Reality Initiative at Colorado State University to utilize immersive technology across research, curriculum, and outreach efforts under the CSU Vice President for Research.

Kyle Rasmussen had a dream to use his skills in journalism and media production to tell stories that could make an impact by allowing people to step into the shoes of others around the world. Kyle decided if BlueShoe Media was going to be telling stories around the world, that is exactly how it should start. He assembled a team of passionate students at Colorado State University to join him on a mission to film a full-feature documentary in India. This documentary about widows, would open the doors to a tremendous journey and make way for the dream to allow creatives with a passion to tell stories to have a place to create freely. Kyle has a heart for telling great stories and a passion for connecting with people through empathy. His dedication, commitment, and vision to tell meaningful stories is unparalleled.

Lindsey Stapay’s entrepreneurial spirit has guided many small and mid-size companies and not-for-profit organizations to not only realize their goals, but surpass expectations on many levels. Stapay has a wide-reaching vision for developing and delivering organizational messages and projects that, combined with her boundless energy and innovative ideas, makes her the perfect moderator for our discussion. Stapay graduated from Colorado State University’s 1st Construction Management and Built Environment Green Home Certificate Program. Since then she has been apart of some of the largest real estate development deals in Downtown Denver through her real estate brokerage firm of 10 years.

Michael Brightman has gained major industry recognition with his  book, “The SketchUp Workflow for Architecture” — a guide that outlines his proprietary techniques and processes for using SketchUp Pro in every phase of the professional design process. Mike also created the highly popular ConDoc Tools for SketchUp Pro extension, which expedites the creation of construction documents in SketchUp Pro. At Brightman Designs, Mike’s goal is to provide his customers with core support services based on real-world design expertise, advanced visualization resources, and collaborative training.

Michael Rath is the CEO of Trilogy Partners and has been designing and building homes in the high country and beyond for over 20 years. His Project Management Modeling process is becoming nationally recognized as revolutionizing the design and build experience for clients by giving them back creativity, power and cost control through visualization and precise project management.

 

 

 

 

 

 

 

 

 

Architectural Digest reached out to Interior Designers for thoughts on great design for every style. Trilogy Partners’ Interior Design is driven by the client. You can see in our portfolio that each home is as unique as the owner. These quotes represent our design philosophy of allowing the space and the people who occupy it to determine design.

Photo courtesy of Architectural Digest

Some of our favorites quotes:

THE TRADITIONALIST “It has to be a subtle, un-strident mix, and the key, of course, is getting the personality of both house and those living in it right.” —Nicky Haslam

THE ICONOCLAST “Being an iconoclast is a state of mind and heart. It’s having a free spirit, finding inspiration everywhere, and not minding rules. It’s appreciating the raw and natural, finding beauty in anomalies.” —Kelly Wearstler

THE MINIMALIST “I like to try to achieve a calm serenity in my work. I want to create interiors that allow furniture, art, and, of course, architecture space to breathe—but there must always be a warmth in the atmosphere.” —Rose Uniacke

THE MODERNIST “We often think of the principal responsibility of a modern interior, particularly one in a project with a beautiful site or a great view, as staying out of the way.” —Steven Harris

 

Do you still use a rotary phone or have you upgraded to a smartphone? Do you use a map while driving or GPS? These may seem like funny questions as it may seem silly to continue using obsolete technologies for reasons other than nostalgia. Why is the design and construction industry still using 2D drawings to relay ideas to clients?

Our design and build industry has been business as usual for the past couple hundred years.  Clients are shown 2D drawings to understand their home or structure and then build based off of 2D drawings. Why is this?

Michael Rath, CEO of Trilogy Partners, asked himself this question in 2008, he was fed up of the old ways where clients had an architect, builder and designer all essentially speaking different languages and not communicating to each other. This old model of how to build leads to projects being over budget, over scheduled and not the exciting and satisfying process that building your dream should be. He decided that it was time to break the mold and figure out a way where he could bring everyone together in one efficient working process. Michael found the 3D Modeling program SketchUp and he knew that this was how he was going to change how things would be done.

 

Michael wanted to create a collaborative process where everyone works from an exact 3D virtual model of a structure that is to be built. Where everyone involved, especially the client, knows exactly how the structure will look, feel and that every design and construction detail, down to the last nut and bolt, is answered for ahead of time. Ahead of any expensive mistakes! And so, Project Management Modeling was born.

Project Management Modeling (PMM) is a residential BIM (Building Information Modeling) solution combining project management, interior design and BIM that creates the most transparency and best results for our clients while saving money every step of the way.

“I love technology, I love being creative, I love collaborating with my clients and my subs and my engineers and I wanted to create an environment where everyone can do the best work possible and show it with everyone else in a collaborative open environment.” Rath

In most design and construction, especially in the residential genre, an architect will take the project so far and then usually hand it off to the engineer who hands it off to the builder. And then an interior designer steps in and you realize your Grandma’s heirloom bed wont fit into the guest room! The client is looking one way and then the next while those disciplines are not talking to each other. Everyone is separate. “It’s not well integrated. It is frustrating!” There wasn’t a BIM alternative for residential projects and something had to change. For Michael, the clients are the most important thing. “It’s my job, my duty to create the best possible house for them.” And so it was important that he would create a solution in order to achieve this.

It is time for our industry to change. We need to take advantage of technological advances and have a little fun doing it. “We have VR now!” The subs, the builders, and the clients can “walk around” the model of the house to be built and see how it will look. They will witness where they need to make changes as if the structure is already built. This allows for changes to be made quickly and without any cost involved.

By utilizing the latest technologies we are able to avoid costly mistakes, be more efficient and sustainable but also be more creative and trying things we wouldn’t have been able to do before. Can you image having a waterfall in your living room? You don’t have to imagine, we can show you in a 3D Model. If you love it, we can build it! Trilogy’s Project Management Modeling is giving you the ability to try new things, to make a custom home truly unique for our clients. If we have the technologies to achieve great things then why not take advantage of this? At Trilogy, we are capitalizing on these technologies and we want you to join us on this exciting adventure.

To find out more about our Project Management Modeling that combines project management, interior design and residential BIM you can click here or contact us directly. We would love to chat to you.

 

Building Information Modeling and Project Management Modeling might be viewed as the same thing, heck they sound kind of similar, right? They have similarities, sure but to put it simply, the main difference between the two is that BIM is for the big guys doing huge multi-million dollar projects, and PMM is BIM plus project management for the rest of us.

“BIM is for the big guys, PMM is for the rest of us.”

BIM is used for large projects: skyscrapers, bridges, huge multi-family condos in large cities. But there was no residential BIM solution, so we needed to create one ourselves. We had to invent our own process that works for every stakeholder in a project, especially the client, with an added bonus of project management (not an aspect of BIM), and so Project Management Modeling was born.

“PMM was born out of a need for a simple client-focused project management tool.”

We wanted everyone to be on the same playing field and to serve the client first and foremost.

DOLLHOUSE 1

 

Project Management Modeling uses a geo-located 3D model of the home or structure to be built that has data of every single element needed to create the model in real life, even down to the interior finishes. We like to say that we build the structure twice, once in the computer and then again in real life. PMM allows us to show clients design details like the tile layout of an entire room in a 3D model as opposed to a piece of tile on a sample board, we vet the structure for build-ability to find issues and fix them before we ever break ground. PMM saves time, saves materials, saves money.

The PMM model is then used for project management. Framers can put on Virtual Reality glasses to see how the structure is framed, masons look at the model for stone layout, electricians can measure the model to see exactly where their electric box needs to go, plumbers know where to run lines to. All of this equals less supervision time and less mistakes on the job site. Again, cost savings every step of the way with PMM. Our estimating is so precise because every piece of the home or structure is in our PMM model. We estimate down to the last door handle so there are no surprises for our clients.

What does PMM do that BIM does not?

We took the best aspects of BIM (3D modeling, vetting a structure before building, having all subcontractors on the same page) and applied that to PMM. Then we kept going to add in project management and interior design. This saves large amounts of money on supervision costs and eliminates the unknown or a designer saying “trust me” when it comes to design decisions. It is BIM plus MANAGEMENT!

“Working with Trilogy Partners and their Project Management Modeling process I can be part of the design process and a decision maker in how the design looks and works, which makes it easier to fabricate. With other contractors I simply put their design into action which is not always considered from a welder’s point of view. Having my input be part of the process ensures a high-quality finished product that I am extremely proud of.” Brian Dunphy, Ark Fabrication

What about Structurals and MEP?

We are now putting structurals into our models. MEP (Mechanical Electrical and Plumbing) is not a complicated issue in single family residences. It will be in the commercial project we do and so we will include it there.

What is the biggest benefits to using PMM? 

Interiors and finishes. Data management. Not having to traipse around with client from one design store to another or deal with small samples and risk management. Using PMM for estimating and having our subcontractors use the model.

Are there any problems that face PMM?

The only problem we face is that a lot of our subcontractors don’t own a computer or iPad where they can view our 3D Model but where theres a will there’s a way. We incorporate workarounds. SketchUp Mobile Viewer is helpful and subs can use their smartphones. For something like tile we print out photos from our PMM model and hang it right in the room the tile is to be installed. A picture is worth a thousand words so our subs have a few thousand words of instruction around them.

What about geolocation? Can you do this in PMM?

Absolutely. It empowers our clients to know the exact view from their kitchen sink or master bedroom. We also use geolocation for solar studies so we are sure to optimize the sun’s warming effect in the winter and minimize that in the summer.

DIAD_0015

 “PMM is a solution for little guys and single family residence builders for whom BIM doesn’t work.”

Why doesn’t BIM work for the little guys exactly?

BIM is beefy and expensive to use. It was created for huge projects like the Freedom Tower in NYC or large bridges. It is expensive for a small contractor to employ on their projects. If BIM worked for us as a single family homebuilder then we would be using it. But it didn’t which is why we created Project Management Modeling.

Why should the industry be using PMM?

Lower costs, less mistakes and more efficient design are just a few of the reasons. If we can lower the cost of housing throughout the country and the globe then more people can afford housing. That is the big goal, to enable those who want to own a home to do so. We also want to be kinder to the the environment by having less waste. Houses can be designed better and smarter which means more efficient sizes, less heating costs, better environmental impact.

We use PMM because it works and builders love it, subs love it, designers love it. But most importantly our clients love it. That is reason enough for us.

Trilogy Partners is to attend The American Institute of Architects Conference in Orlando this April 27th-29th. Trilogy will be the guests of SketchUp at the conference, where they will be demonstrating and talking about Trilogy’s Project Management Modeling and how this process complete with SketchUp software is changing the way homes are designed and built across America. Trilogy wants to educate the industry and market about their process, and the close relationship Trilogy has with SketchUp is helping them achieve this.

 

Michael Rath, CEO of Trilogy comments “Trilogy Partners is thrilled to be invited to the 2017 American Institute of Architects convention to present our Project Management Modeling process to 25,000 architects and industry professionals. We are excited to share our process that puts clients as the center of a project while showing every design detail of a home’s exterior and interior, all while being more efficient with time and materials. We think PMM is going to blow the roof off of AIA!”

From all of us at Trilogy we would like to say a big thank you to our friends at SketchUp for your continued support of our Design Build firm in Breckenridge, Colorado.

Please see our recent interviews with SketchUp on their website.

Part I 

Part II 

965 N Ten Mile Dr. , Unit A1 Frisco, CO 80443
Phone: 970-453-2230

Email: information at trilogybuilds dot com
Facebook: TrilogyPartners
Twitter: @trilogybuilds
Instagram: trilogybuilds
Youtube: The Trilogy Partners Channel
Houzz: trilogy-partners